Chapter 6 Sectional Views

1
Chapter 6Sectional Views
2
Test Next Week

• Will cover Assignments 1-4 (Chap 1-5)
• AutoCAD commands, basic/advanced
• Hand sketching isometric, orthographic views
• AutoCAD orthographics (complete a drawing)
• Open Book
• 1.5 hours 1230 2 pm
• 9 1215 Ch 7 Auxiliary Views

3
(No Transcript)
4
(No Transcript)
5
(No Transcript)
6
(No Transcript)
7
(No Transcript)
8
Cutting Plane Lines

• Use DASHED lines
• Can make a layer for Cutting Plane Lines
• OR
• FormatgtLinetypegtLoad DASHED
• ModifygtProperties, Select LinetypeDASHED\
• Add a leader Leader tool from Dimension Tbar
• Use OSNAP Perpendicular to find pt of arrow
• After placing, enter twice, letter A, enter twice
• Sometimes messes up with a little leader
  extension
• Arrowheads DimensionStyles, arrows, scale 0.5

9
(No Transcript)
10
(No Transcript)
11
(No Transcript)
12
(No Transcript)
13
Drawing Hatch

• Draw a few closed shapes
• Draw Tools gt Hatch, then PickPoints and
• Click inside area(s) then enter when done
• Click OKhatch will be there
• Adjust Hatch size/pattern (DrawgtHatch)
• Check out patterns ANSI31, etc.
• Change angle and scale

14
(No Transcript)
15
(No Transcript)
16
(No Transcript)
17
(No Transcript)
18
(No Transcript)
19
(No Transcript)
20
(No Transcript)
21
(No Transcript)
22
(No Transcript)
23
(No Transcript)
24
(No Transcript)
25
(No Transcript)
26
(No Transcript)
27
(No Transcript)
28
(No Transcript)