A High Gain Input-Parallel Output-Series DC/DC Converter With Dual Coupled Inductors || 2015-2016 IEEE Power electronics Projects Training - PowerPoint PPT Presentation

About This Presentation
Title:

A High Gain Input-Parallel Output-Series DC/DC Converter With Dual Coupled Inductors || 2015-2016 IEEE Power electronics Projects Training

Description:

A High Gain Input-Parallel Output-Series DC/DC Converter With Dual Coupled Inductors || 2015-2016 IEEE Power electronics Projects Training. Contact: IIS TECHNOOGIES ph:9952077540,landline:044 42637391 mail:info@iistechnologies.in – PowerPoint PPT presentation

Number of Views:238

less

Transcript and Presenter's Notes

Title: A High Gain Input-Parallel Output-Series DC/DC Converter With Dual Coupled Inductors || 2015-2016 IEEE Power electronics Projects Training


1
A High Gain Input-Parallel Output-Series
DC/DCConverter With Dual Coupled Inductors
  • Presented by
  • IIS TECHNOLOGIES
  • No 40, C-Block,First Floor,HIET Campus, North
    Parade Road,St.Thomas Mount, Chennai, Tamil Nadu
    600016.
  • Landline044 4263 7391,mob9952077540.
  • Emailinfo_at_iistechnologies.in,
  • Webwww.iistechnologies.in

2
ABSTRACT
  • This project presents a novel input-parallel
    output-series boost converter with dual coupled
    inductors and a voltage multiplier module.
  • On the one hand, the primary windings of two
    coupled inductors are connected in parallel to
    share the input current and reduce the current
    ripple at the input.
  • On the other hand, the proposed converter
    inherits the merits of interleaved
    series-connected output capacitors for high
    voltage gain, low output voltage ripple, and low
    switch voltage stress.
  • Moreover, the secondary sides of two coupled
    inductors are connected in series to a
    regenerative capacitor by a diode for extending
    the voltage gain and balancing the
    primary-parallel currents.
  • In addition, the active switches are turned on at
    zero current and the reverse recovery problem of
    diodes is alleviated by reasonable leakage
    inductances of the coupled inductors.

3
CIRCUIT DIAGRAM
4
TOOLS AND SOFTWARE USED
  • MP LAB
  • ORCAD/PSPICE
  • MATLAB/SIMULINK

5
OUTPUT
  • HARDWARE
  • SIMULATION

6
Contact
  • IIS TECHNOLOGIES
  • No 40, C-Block,First Floor,HIET Campus, North
    Parade Road,St.Thomas Mount, Chennai, Tamil Nadu
    600016.
  • Landline044 4263 7391,mob9952077540.
  • Emailinfo_at_iistechnologies.in,
  • Webwww.iistechnologies.in
Write a Comment
User Comments (0)
About PowerShow.com